Every standby generator Solivance Electric installs is permitted and inspected. That is not a formality. The inspection is where a third party checks the transfer switch, the grounding, the gas line, and the placement — the parts that keep generator power off CenterPoint’s lines and keep exhaust away from bedroom windows.
Permit requirements change depending on where the house sits. Inside the City of Houston is one set of rules. Bellaire, West University Place, Sugar Land, Missouri City, Stafford, and Katy each run their own building departments. Unincorporated Harris County and Fort Bend County have their own processes again. This post covers what a generator install usually needs and how Solivance Electric handles it.
What permits does a standby generator need in Houston?
Inside the City of Houston, a standby generator needs an electrical permit for the generator, transfer switch, and wiring, plus a separate permit and inspection for the gas connection. HOA approval is often required on top of that. Other cities and unincorporated Harris County set their own rules, so Solivance Electric confirms the AHJ by address before quoting.
Which permits usually apply?
| Approval | Covers | Who handles it |
|---|---|---|
| Electrical permit | Generator, automatic transfer switch, conductors, grounding, disconnects | Solivance Electric, as the licensed electrical contractor |
| Gas / plumbing permit | Gas line from the meter to the generator, sizing, pressure test | Coordinated by Solivance Electric with a licensed plumber |
| Gas utility coordination | Meter upsizing if the existing meter cannot carry the added load | Coordinated with CenterPoint |
| HOA / deed restriction approval | Placement, screening, sometimes noise | Homeowner submits; Solivance Electric provides the site plan |
| Propane tank | Tank setting and line, where no natural gas is available | Coordinated with the propane supplier |
Not every job needs every row. A propane install does not need a CenterPoint meter change. A house outside an HOA skips that step.
Who is the AHJ for my address?
The authority having jurisdiction (AHJ) is the office that issues the permit and sends the inspector. A Houston mailing address does not always mean the City of Houston. Bellaire, West U, and the Memorial Villages — Bunker Hill, Hedwig, Hunters Creek, Piney Point, Spring Valley, and Hilshire — are separate cities with their own departments. Requirements in unincorporated Harris County differ from the City of Houston as well.
Solivance Electric confirms the AHJ by address before the quote, so the permit scope and fees are in the fixed-fee number.
What does the inspector check?
The electrical inspection covers the work under the NEC as adopted locally. On a standby generator, that usually means:
- Transfer equipment. NEC Article 702 requires a transfer switch that keeps the generator and utility from connecting. How it works is covered in what an automatic transfer switch does.
- Sizing. The generator is sized for the load it can carry, per NEC 702 and the NEC 220 calculation, or the install uses automatic load management.
- Generator conductors and protection. Sized and protected per NEC 445.
- Grounding and bonding. Correct for the transfer switch type and generator configuration.
- Emergency disconnect. Where the 2023 NEC is adopted, an outdoor emergency disconnect on one- and two-family dwellings under NEC 230.85.
- Placement. Clearances to windows, doors, vents, and lot lines per the manufacturer and local code.
- Labeling. Signage at the service showing a generator is on site.
The gas inspection checks the line size, materials, shut-off, and a pressure test.
How long does permitting take?
It varies by AHJ and by season. After a major outage, permit offices see a wave of generator applications, and review times stretch. After Hurricane Beryl in July 2024 knocked out power to more than 2 million CenterPoint customers, demand for generator installs across the region climbed. Filing in the off-season, November through spring, gives the review and inspection schedule room before hurricane season.
Solivance Electric gives an estimated schedule with the quote and updates it once the permit is filed.
What about HOAs?
Deed-restricted neighborhoods in Bellaire, West U, Meyerland, the Memorial Villages, Sugar Land, and many Katy and Cypress subdivisions often have rules about where equipment can sit and how it is screened. Some limit placement in front or side yards. The HOA does not issue the city permit, and the city permit does not satisfy the HOA. Both are needed.
Solivance Electric provides a site plan with the generator location, pad, and clearances for the HOA submission. Getting HOA approval before ordering the unit avoids a moved pad later.
Do commercial generators need different permits?
A business generator follows the same basic path — electrical permit, gas or fuel permit, inspection — with more paperwork. Commercial work usually needs drawings with the load calculation, a one-line diagram, and equipment specs. A building with a fire alarm or life-safety system may involve the fire marshal. Larger units can raise questions about fuel storage and, in some cases, air permitting.
Solivance Electric handles commercial generator permits for retail centers and warehouses across Houston, Stafford, and Sugar Land. The scope is confirmed on the site walk, and the permit work is in the fixed-fee quote.
What does the homeowner need to provide?
Very little. Solivance Electric needs the property address, the owner’s name as it appears on the deed or tax record, and access to the meter, panel, and generator location. If an HOA approval letter is required, the permit office or the inspector may ask for it, so keep a copy. Everything else — the load calculation, equipment specs, and site plan — comes from us.
What does Solivance Electric handle?
- Site walk. Location, clearances, service, gas meter, and AHJ confirmed.
- Fixed-fee quote. Permit fees and filing included.
- Site plan. For the HOA and the permit application.
- Permit filing. Electrical permit pulled under TECL #41163; gas permit coordinated.
- CenterPoint coordination. Gas meter upsizing where needed.
- Install. Pad, generator, transfer switch, wiring, gas connection.
- Inspections. Scheduled and attended by Solivance Electric.
- Commissioning. Test transfer under load and a walkthrough with the owner.
You do not chase the permit office. We do.
Does buying the generator change the permit process?
No. Whether you buy the unit from Solivance Electric as an authorized Briggs & Stratton dealer or bring a unit in, the install is permitted and inspected the same way. Buying the unit and install together keeps the generator, transfer switch, and permit drawings matched. See the lineup with pricing on the generators page. If paying over time helps, read how to finance a standby generator in Houston.
Get the permits handled
Solivance Electric confirms the AHJ, pulls the permits, coordinates CenterPoint and the gas inspection, and attends every inspection. Request a site walk or call (832) 965-9964. More on the install is on our generator install page and our Southwest Houston page. Financing available through Synchrony — ask about monthly payment options. Subject to credit approval. Details on the financing page.

